| Author |
Thread |
|
Rayovac
Advanced Member
United States
2,049 posts
Joined: Jan, 2008
|
 Posted - 2010/04/26 : 16:43:41
There was a thread about this here before but I can't find it anywhere. :(
Basically it's where e.g. you have a vocal, and there's what sounds like reverb, but it's reversed; the reverb fades in and comes before the vocal instead of coming after and fading out. What was the efficient method for this? Yes, you can always render the effect with the clip and reverse it all, but that's just too much trouble really, especially with DAWs like Sonar that have the freeze options.
__________________________________
"The individual member of the social community often receives his information via visual, symbolic channels."
This also means "People read."
Alert moderator 
|
Fishy
Advanced Member
Norway
2,521 posts
Joined: Apr, 2004
|
Posted - 2010/04/26 : 16:48:15
Just put reverb on a sample and reverse it back with the reverb
__________________________________
https://open.spotify.com/artist/5p4DMSX1fKl07ogZewmRp0?si=X0-Z2b4oQLGex3gvtdazbw
[email protected]
Alert moderator
|
Hard2Get
Advanced Member
United Kingdom
12,837 posts
Joined: Jun, 2001
|
Posted - 2010/04/26 : 16:50:57
What Fishy means is, reverse the sample, add reverb then reverse it back. That is one way of doing it but of course it's limiting. The most efficient method otherwise is just to bounce the reverb track then cut the sections out that you want to reverse and reverse them in the sequencer there and then, I'm assuming you can do this in Sonar. There isn't really any simpler methods than that :P
Alert moderator
|
Meathead
Advanced Member
United Kingdom
4,217 posts
Joined: Sep, 2006
|
Posted - 2010/04/26 : 18:40:07
Taken from: http://www.dubstepforum.com/viewtopic.php?t=89073&postdays=0&postorder=asc&start=140
"Try some reverse reverb;
Reverse Reverb Effect is the effect that you hear before a vocal or riff starts in a tune that sounds like a sucking sound. This effect is easy to create using your current sequencer and audio editor.
First, you need to open your sequencer, and write your catchy riff or record your vocal sample. You can listen to your riff/vocal with Reverb and Delay whilst writing it if you like, but make sure it isn't applied permanently. Once you are happy with it, export the riff/vocals without the effects into a wave file.
Next, you need to load the sample you have created into an audio editor, then using the tools available, reverse the sample so that it is playing backwards. Save this sample with a new name, such as vocalbackwards.wav. Load this sample into your sequencer, then load up your delay and reverb plugins and choose the settings you will be using in the track. Turn the knob in the reverb plugin so that its 100% wet. Now, save the reversed riff/vocals WITH the effects and make sure that the trailing echo is also saved into the wave file, save the file as something like vocalbackwardseffect.
Now, load the new sample into your audio editor, and flip it so that its playing the correct way again. Now you can hear the sucking reverse reverb sound at the beginning. But you don't want the rest of the riff/vocal as there is too much effects on it. So, snip of the rest of the track using the tools available, making sure that you have the sucking sound without the rest of the riff/vocals. Now save it as something like reversereverbvocal.wav.
Now you can load it into your sequencer and place it into your track before your vocal/riff to give your track that extra something."
Bit of a long-winded method but that's the principal.
__________________________________
"Music creates order out of chaos; for rhythm imposes unanimity upon the divergent, melody imposes continuity upon the disjointed, and harmony imposes compatibility upon the incongruous." -Sir Yehudi Menuhin
Alert moderator
Edited by - Meathead on 2010/04/26 18:41:02 |
Hard2Get
Advanced Member
United Kingdom
12,837 posts
Joined: Jun, 2001
|
Posted - 2010/04/26 : 18:55:48
Edit.
Alert moderator
Edited by - Hard2Get on 2010/04/26 18:56:42 |
Dain-Ja
Advanced Member
Canada
1,983 posts
Joined: Oct, 2004
|
Posted - 2010/04/26 : 20:56:27
you can get an event cooler effect if you use also use a delay
__________________________________
Producer/DJ/Label owner
Rush Delivery Records
Visit makemeRUSH.com for music from the ONLY North American hardcore label pressing vinyl!
FREE track every Monday: http://www.rushdeliveryrecords.com/?p=229
Alert moderator
|
Hard2Get
Advanced Member
United Kingdom
12,837 posts
Joined: Jun, 2001
|
Posted - 2010/04/26 : 21:02:01
Lol as a result of this thread I'm going to use both in my current tune.
Alert moderator
|
bridson10ak
Junior Member
United Kingdom
81 posts
Joined: Nov, 2008
|
Posted - 2010/04/30 : 09:32:44
hi there.i use fl but u will get the point
a tutoial i done http://www.youtube.com/watch?v=0_7VzqjS-gM
__________________________________
http://soundcloud.com/bridson
Alert moderator
|
BDW
Starting Member
United Kingdom
1 post
Joined: Nov, 2007
|
Posted - 2010/05/24 : 15:09:39
quote:
Originally posted by Meathead:
"Try some reverse reverb;
Reverse Reverb Effect is the effect that you hear before a vocal or riff starts in a tune that sounds like a sucking sound. This effect is easy to create using your current sequencer and audio editor.
First, you need to open your sequencer, and write your catchy riff or record your vocal sample. You can listen to your riff/vocal with Reverb and Delay whilst writing it if you like, but make sure it isn't applied permanently. Once you are happy with it, export the riff/vocals without the effects into a wave file.
Next, you need to load the sample you have created into an audio editor, then using the tools available, reverse the sample so that it is playing backwards. Save this sample with a new name, such as vocalbackwards.wav. Load this sample into your sequencer, then load up your delay and reverb plugins and choose the settings you will be using in the track. Turn the knob in the reverb plugin so that its 100% wet. Now, save the reversed riff/vocals WITH the effects and make sure that the trailing echo is also saved into the wave file, save the file as something like vocalbackwardseffect.
Now, load the new sample into your audio editor, and flip it so that its playing the correct way again. Now you can hear the sucking reverse reverb sound at the beginning. But you don't want the rest of the riff/vocal as there is too much effects on it. So, snip of the rest of the track using the tools available, making sure that you have the sucking sound without the rest of the riff/vocals. Now save it as something like reversereverbvocal.wav.
Now you can load it into your sequencer and place it into your track before your vocal/riff to give your track that extra something."
Barry Walker is owner and webmaster of BDWRekordings.com - Free Dance Music Netlabel and writes music under the name of "Vibemaster B" and is one part of Hardcore Dance PA "Euphorik Rhythm"
The article was posted on the dubstep forum without the proper attribution. Original Article
Alert moderator
Edited by - BDW on 2010/05/24 15:13:23 |
|
Printer friendly
