| Author |
Thread |
|
icex
Advanced Member
United States
644 posts
Joined: Aug, 2004
|
 Posted - 2004/11/22 : 06:56:08
does n e one know how to connect a dj setup to a audigy 2zs soundcard?? i cant seem to do it. i plugged the rca cables from my mixer to my line in red and white rca's in the soundcard surface.
but when i play a turntable i dont hear n e sound!
also if i have a home amp that i want to run speakers thru
how can i have that working at the same time that i am recording on my computer?
please help
Alert moderator 
|
milo
Advanced Member
Canada
3,391 posts
Joined: Sep, 2001
347 hardcore releases
|
Posted - 2004/11/22 : 07:32:23
two things to check:
1) make sure your source from the mixer is right and you're sending a signal
2) make sure the sound card setting on the computer is set to Line In and not muted
as far as running to your amp you can either run the master to that and the booth to your computer (if it supports it) or and you can a splitter out of your computer soundcard that goes to your speakers and run that to your amp, just get the proper conversion bits from radio shack and you should be set
__________________________________
http://milo.happyhardcore.com
HappyHardcore.com/North American Hardcore Movement/Totally Sweet Radio/Hardcore Street Team
Alert moderator
|
icex
Advanced Member
United States
644 posts
Joined: Aug, 2004
|
Posted - 2004/11/22 : 18:09:23
well im not sure what to do.
all i do is take the rca wire from the mixer and plug in into my aux in (in my audigy 2 zs soundcard) then i go into volume control and set the kx drivers/line in into unmuted and put the volume nob on but i still hear no sound.
for now i would just like to plug the turntables into my pc and thats it.
__________________________________
http://www.clubstyle.us
Alert moderator
|
Printer friendly
